7 Must Have Auto Repair Tools

When getting started with your vehicle body repair business, let’s face it… you will need some auto body tools.

You might be a hobbyist or you may be looking into auto body and paint being a new income generating venture on your own. Whatever your selection is, if you need to paint a vehicle and commence doing the projects, you may need to start building your tool chest.

Today were going to mention the 7 most frequent auto body and paint tools that you’ll probably wind up needing in the future in case you already don’t have them by now.

If you’re set on painting cars and auto body repair being a income generating venture then you’ll want an air compressor that can last many, many years into the future.

Then I recommend obtaining a 240V 60 gallon which has a 5-7 HP setup.

(See detailed post on the best size air compressor you need here).

It’s suitable for painting an automobile, or possibly a large van and can power your entire air tools with ease. It’s a workhorse that you’ll be proud you purchased. Bigger is better when it comes to compressors.

If you need something small and only intend on painting touch ups and motorcycles then this 25-35 gallon air compressor will work for you.

SIDE NOTE: You can and I have painted the full car having a smaller 30 gallon tank. You just need to maintain your eyes and ears around the pressure fluctuation and adjust accordingly while your painting I don’t recommended it, but it is now possible.

I get asked constantly …”Tony what type of spray gun should I get?” I always reply with “get what you could afford?” …If you really can afford a $1,000. SATA, then have it because it’s one of the best brands available in addition to Iwata.

It will surely show a change when laying your paint, OR it is possible to receive the new ATOM X spray gun for the fraction in the cost when compared to SATA, plus you receive the same results. And I proved it.

The ATOM will be the main spray gun that we use on the LABAP Headquarters. Shop for an ATOM spray gun here. These guns are only amazing and you now officially get MP technology meaning less overspray, less paint waste and much better direct coverage on your panels.

Just understand that you don’t have to have the BEST gun when starting out. When I first started painting, I started having a $100. Astro spray gun. I don’t even think it turned out a HVLP. But I painted for around annually or two with this same gun. Remember, as you will get better, you’ll be able to invest and acquire a greater spray gun. You’ll start noticing that your particular paint jobs start in the future out better with a spray gun that atomizes correctly. This is one from the most key elements.

You need a spray gun that properly ATOMIZES your paint into fine particles onto the panel, which will result in the glossier professional paint job. Of course, your spray gun speed and material flow also play one factor. But a good gun can be answer to superior finishes. Shop the brand new ATOM X here.

In closing, get what you can afford. If I had to recommend a fantastic starting spray gun it might be the ATOM or perhaps the Warwick 904. For $180 – $250 you’ll be able to get a great starter/professional spray gun. See a complete video and run-down on auto spray guns here.

Do you desire to obtain a German or Japanese high-end spray gun just like an Iwata or SATA for the fraction in the cost? Check out the distinct Atoms and Warwicks at ZooLaa.com (a great site for high quality spray guns and pearls and flakes).

These spray guns include the ONLY spray guns that we use for all of our projects. They spray FANTASTIC, are manufactured rich in quality materials and craftsmanship. And you understand it all for approximately 1/3 from the cost when compared to the most costly spray guns about the market whilst getting exactly the same professional features and qualities.

  1. Dual Action Sander

Now, This is not a legitimate MUST-HAVE, and often will help save a TON of time with basic sanding and the entire body filler shaping. Get one should you can afford it. They cost from $50. – $175. (see a complete post on Dual Action sanders here).

I explain to you precisely how you are able to use one of them to chop some MAJOR time off of your body work and sanding times. Don’t worry, these strategies are located within our VIP course and you also can find out about that here.

  1. Slide Hammer/ Stud Welder
    If you’re planing on repairing some sort of dents and removing panels then one of these brilliant is a necessity. You can go which has a cheaper version and obtain an elementary slide hammer which uses screws and or hook adapters to drag out dents. Or your other choice is to invest inside a electric style stud welder.

When they first arrived you’d obtain them being sold for $350. – $450. Nowadays you’ll be able to pick them up for under $190. Not bad!

If on a tight budget, tend not to count out local swap meets or maybe your local online classifieds to grab great used tools. I have had many VIP members score compressors along with a lot of auto body and paint tools from craigslist.com as well as other popular classifieds online for fractions of the items they might of paid if they had bought them new.

If you’re not sure using one of them, don’t worry because we’ve step-by-step videos in our VIP area that can walk you through the entire process and teach you the way you use the same tools with maximum results and success.

Yes, we also show you ‘insider’ sneaky how-to’s that only auto body pros fully realize about :).